Monday, November 13, 2017

Thanksgiving | Robot Turkey 2.0

With Thanksgiving coming up, I thought I'd make a turkey.
metal turkey
Technically, he's a "turkey assemblage," but I am calling him "Robot Turkey 2.0," because he follows in the footsteps of last year's original Robot Turkey (pictured below).
turkey assemblage
Off and on over the last 12 months, I've been hunting for turkey parts at garage sales and thrift stores, which was a little difficult because I didn't really know what I wanted the new guy to look like. All I knew was that I wanted him to be different than the original.
metal Jell-O mold
 As usual, I overcollected. I now have two boxfuls of metal junk (aka turkey parts) in my basement (so odds are there will be several more robot turkey iterations to come). As I sifted through the pieces last weekend, I decided I'd start RT 2.0 with an old Jell-O mold.  
making a turkey assemblage
 I thought the mold resembled a turkey breast, so that would be the body. Then I drilled a couple of holes into the bottom of the mold ...
making a junk turkey
 ... so I could attach his legs, which were made out of silver cabinet pulls.
making a turkey assemblage
 Here's how they're attached inside.
making a turkey assemblage
I cut a dowel the same height as the Jell-O mold/body and glued it in place with E6000. My plan was to glue a mini tart pan that looked a lot like turkey feathers to the dowel, so the feathers would be sticking up behind the body. 
metal turkey assemblage
 The tart pan feathers looked great. Unfortunately, I realized at this point that there were some center of gravity issues -- i.e., the turkey kept tipping forward when I tried to set him on his feet. I thought maybe if I put some weight in the back of the Jell-O mold, it might help balance him out ...
making a junk turkey
... so I pried the tart pan off the dowel and filled the Jell-O mold with some mortar (because in addition to making a robot turkey last weekend, I also happened to be tiling a wall in my bathroom).  
junk turkey
The mortar did the trick. I glued the tart pan back on after the mortar dried and he stood straight up.
turkey parts
I found a metal knob to use as the turkey's head, a couple of small silver disks to use as eyes and a gold hex nut to use as his beak. 
turkey assemblage
 I glued the facial features onto the head and glued the head onto the Jell-O mold body. I also attached a fancy swirly paper clip under his head to look like a waddle. 
turkey robot
  The weight  of head messed with the center of gravity again, but, happily, I discovered that if I screwed the legs a little further into his body and arranged his feet so they were slightly pigeon-toed,  I could get him to stand straight up. 

Isn't he cute? I'm not sure if he's an improvement over the original, but he definitely has his own personality.

Linking to:
Salvaged Junk Projects | Funky Junk Interiors
The Scoop
Tutorials & Tips | Home Stories A to Z
Totally Terrific Tuesday
Talk of the Town | My Repurposed Life